11.12.2.1 PBX Configuration—[3-12-2] Group—VM(DTMF)Group—Group Settings—Member ListSelect the group to programme from the VM(DTMF) Group Number list.To assign members to the group, enter directly or click Extension No. Setting (see 2.1.7 Extension NumberSetting). To copy members to another group, click Member list copy, select the group, and then click OK.NoticeThis screen is for programming legacy gateway PBXs. For information about setting up a legacy gatewayPBX, see 9.29 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.Unless noted otherwise, the programming information is the same as described in the PC ProgrammingManual of the legacy gateway PBX. Refer to the corresponding Group—VM(DTMF) Group—GroupSettings—Member List section in the PC Programming Manual of the legacy gateway PBX for moreinformation.Only ports set to VM(DPT) for DPT Type—Type in the extension’s Port Property screen will be displayed. Fordetails, see To access port properties in 9.1 PBX Configuration—[1-1] Configuration—Slot.The Site, Shelf, and Slot, and Port for each item are displayed for your reference. For details, see CommonProgramming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.PC Programming Manual 58511.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
