18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI / DIDTable—Automatic RegistrationAutomatic Registration allows DDI/DID numbers and DDI/DID destinations in each time mode (day/lunch/break/night) to be programmed at once for a set of locations in series.Beginning Entry LocationSpecifies the number of the first location to be programmed.Value Range1–1000Maintenance Console Location18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Automatic RegistrationPC Programming Manual References18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID TableFeature Guide References2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)Generate DDI/DID Number (From)Specifies the DID number of the first location to be programmed. DDI/DID numbers for subsequent locationswill be generated automatically, by adding one to the value of the previous location.Value RangeMax. 32 digits (consisting of 0–9)Maintenance Console Location18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Automatic RegistrationPC Programming Manual References18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID TableFeature Guide References2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)Number of RegistrationSpecifies the number of locations to be programmed.Value Range1–1000756 PC Programming Manual18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Automatic Registration
