Value RangeOff: ARS is disabled.On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line Accessmethod.On for Any CO Access Operation: ARS operates when an extension user makes a call using any Trunk Accessmethod.Same as System Setting: The setting specified in ARS Mode in 16.1 PBX Configuration—[8-1]ARS—System Setting is applied.Maintenance Console Location14.6 PBX Configuration—[6-6] Feature—TenantPC Programming Manual References16.1 PBX Configuration—[8-1] ARS—System SettingFeature Guide References2.8.1 Automatic Route Selection (ARS)5.1.3 Tenant ServiceSystem Speed DialSpecifies which system speed dialling table is used by the tenant.Value RangeSame as System Setting: PBX common system speed dialling numbers are used.Tenant Exclusive: Individual tenant system speed dialling numbers are used.Maintenance Console Location14.6 PBX Configuration—[6-6] Feature—TenantPC Programming Manual References14.1 PBX Configuration—[6-1] Feature—System Speed DialFeature Guide References2.6.4 Speed Dialling—Personal/System5.1.3 Tenant ServiceTime Service ModeSpecifies which PBX’s clock in a One-look network is used as reference for the tenant’s Time Service functionsand for ICD Group functions.Value RangeNormal: Use the clock of the PBX to which the device or trunk for a service (e.g., incoming call features) isconnected.PC Programming Manual 71114.6 PBX Configuration—[6-6] Feature—Tenant
