11.7.2 PBX Configuration—[3-7-2] Group—UM Group—UnitSettingsA UM group has a floating extension number, which can be assigned as the destination for redirected callsand incoming calls. In a One-look network, each PBX has its own UM group, and each group has its ownfloating extension number.To assign extension numbers to the group, click Member List. To view a list of all programmed extensionnumbers and types, click Extension List View (see 6.5 Tool—Extension List View).Floating Extension No.Specifies the floating extension number of the UM group.Value RangeMax. 5 digits (consisting of 0–9)Maintenance Console Location11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit SettingsPC Programming Manual References9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port PropertyFeature Guide References3.1.1 Unified Messaging System Overview—UM Ports and the UM GroupGroup NameSpecifies the name of the UM group, which will be shown on the display of extensions that call the UM group.Value RangeMax. 20 charactersMaintenance Console Location11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit SettingsPC Programming Manual References9.7 PBX Configuration—[1-1] Configuration—Slot—UM Port PropertyFeature Guide References3.1.1 Unified Messaging System Overview—UM Ports and the UM GroupSite nameIndicates the Site Name of the PBX that UM group belongs to (reference only).PC Programming Manual 56911.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit Settings
