2.1.3 Logging in to Web Maintenance ConsoleAfter establishing a connection to Web Maintenance Console (see 1.2.1 Starting Web MaintenanceConsole), the login window is displayed, and a login name and password must be entered. If this is the firsttime to log in to Web Maintenance Console, and the PBX is in its initialised, factory default state, you must login using the Installer level account to begin the Easy Setup Wizard (see 2.1.4 Easy Setup Wizard).For information about account names and passwords, see 2.1.1 Web Maintenance Console Accounts.Login ScreenLogin Restrictions• Up to 32 User (User) and User (Administrator) level accounts may log in at one time to Web MaintenanceConsole in On-line mode.• Only 1 user may log in using the Installer level account at a time. If someone using the Installer level accountis logged in to Web Maintenance Console and is making changes, and another user logs in using theInstaller level account, the user logging in may override the other logged-in user so that programming canbe performed (a warning screen will be displayed for the user that is about to override the currentlylogged-in user).• Users can view only menus and setting items they may access according to their account level. For User(Administrator) level accounts, the items that can be viewed can be set by the Installer level account. Fordetails, see 6.8 Tool—Screen Customise.• If two logged-in users change the same setting, the change made last will be the effective setting.• If a user attempts to log in, but enters an incorrect password three times, the failure is recorded in the errorlog of the PBX and the user may not attempt to log in again for a 5-minute period.42 PC Programming Manual2.1.3 Logging in to Web Maintenance Console
