7.10.3 Utility—Automatic Two-way Recording—Extension SettingListIn this list you can view the settings of extensions that are programmed to have calls recorded by the AutomaticTwo-way Recording feature. Information for each extension, including the extension’s supervisor, UM Groupnumber, and Automatic Two-way Recording destination mailbox is displayed.You can specify which types of calls will recorded for each extension. These settings may be changed by aprogrammer with a User (Administrator) account.1. For an extension, select a setting for Internal Call, External Call, and ICDG Incoming Only. (See belowfor details.)• Internal Call: Extension-to-extension calls are recorded.• External Call: Calls with outside parties are recorded.• ICDG Incoming Only: Only calls that are received by the extension through an incoming calldistribution group are recorded.2. Select On or Off for that setting.3. Click OK when finished.The programming items displayed on this screen are as follows.Extension NumberIndicates the extension number of the extension (reference only).Value RangeMax. 5 digits (consisting of 0–9)Maintenance Console Location7.10.3 Utility—Automatic Two-way Recording—Extension Setting ListExtension NameIndicates the name of the extension (reference only).Value RangeMax. 20 charactersMaintenance Console Location7.10.3 Utility—Automatic Two-way Recording—Extension Setting ListInternal CallSpecifies whether intercom calls for the extension will be automatically recorded.NoteCalls between extensions that are connected in a QSIG network are seen as external calls, irrespective ofwhether an activation key for QSIG enhanced features is used. To enable Automatic Two-way Recordingfor this type of call, set External Call to On.Value RangeOn, OffPC Programming Manual 1537.10.3 Utility—Automatic Two-way Recording—Extension Setting List
