11.5.3 PBX Configuration—[3-5-3] Group—Incoming CallDistribution Group—MiscellaneousOptional settings related to Incoming Call Distribution Groups can be programmed.Options—Call Log to ICD Group for Answered CallSelects whether answered calls to an ICD Group are also logged in the Incoming Call Log for the group, inaddition to the log of the extension that answered the call.Value RangeDisable, EnableMaintenance Console Location11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—MiscellaneousFeature Guide References2.2.2.1 Incoming Call Distribution Group Features—SUMMARYOptions—ICD Group Key ModeSelects whether ICD Group buttons at extensions operate as normal or in Enhanced Phantom button mode.When set to Enhanced Phantom mode, creating an ICD Group button at an extension using PT personalprogramming automatically registers the extension as a member of the relevant ICD Group. The extensionuser can also specify the delayed ringing settings.Value RangeGroup DN, Enhanced PhantomMaintenance Console Location11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—MiscellaneousPC Programming Manual References11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—MemberList— Delayed RingFeature Guide References2.2.2.1 Incoming Call Distribution Group Features—SUMMARYOptions—Longest Idle DistributionSelects whether incoming calls are distributed to idle extensions evenly in order (UCD), or to the extensionthat has been idle the longest (ACD).Value RangeDisable (UCD), Enable (ACD)562 PC Programming Manual11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous
