9.2 PBX Configuration—[1-1]Configuration—Slot—SummarySummary information is displayed for all cards installed in the PBX.Click one of the following buttons to view a summary of the shelf in the PBX:• Physical: View the physical card shelf.• Virtual: View the virtual card shelf.• Legacy-GW1: View the physical card shelf of the legacy gateway connected to connection port 1 of theSTACK-M card.• Legacy-GW2: View the physical card shelf of the legacy gateway connected to connection port 2 of theSTACK-M card.Physical ShelfThe Site, Shelf, and Slot for each item are displayed for your reference. For details, see CommonProgramming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.Card TypeIndicates the service cards installed in the slots of the physical shelf (reference only).Value RangeCard Type:SLC2: SLC2 card of an installed LCOT2+SLC2, BRI4+SLC2, PRI30+SLC2, or PRI23+SLC2 cardLCOT2: LCOT2 card of an installed LCOT2+SLC2 cardBRI4: BRI4 card of an installed BRI4+SLC2 cardPRI23: PRI23 card of an installed PRI23+SLC2 cardPRI30: PRI30 card of an installed PRI30+SLC2 cardDOORPHONE: DOORPHONE CardSTACK-M: Stacking Master Card for connecting PBXs as legacy gatewaysMaintenance Console Location9.2 PBX Configuration—[1-1] Configuration—Slot—SummaryPC Programming Manual References9.1 PBX Configuration—[1-1] Configuration—Slot9.22 PBX Configuration—[1-1] Configuration—Slot— SLC2 - Card Property9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI typeStatusIndicates the card status (reference only).Value RangeINS: The port is in service.OUS: The port is out of service.Fault: The port is not communicating with the network.Pre-Install: A card has been added to the slot.180 PC Programming Manual9.2 PBX Configuration—[1-1] Configuration—Slot—Summary
