2-8 Station Programming2.2 ProgrammingExtension Charge Fee ReferenceProvides you with the display of each extension charge (telephone rate).— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 9.2. Enter the ID Code (4 digits).• The display shows:• To erase an incorrect entry, press the CLR (S2) button.3. Dial 1.4. Dial the extension number or press the NEXT (S3) button until theextension number will be designated.• The display shows the meter. If you assign the extension number 201.5. Press the SEL (S1) button.• The display shows the charge.• If you press the NEXT (S3) button, the extension number that isassigned at the next jack number will be displayed to advance.6. Press the PREV ( ) button or END ( ) button.• PREV ( ) — return to step 4.• END ( ) — return to the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You must assign the ID code through System Programming.12345916ID Codeextension numberorS 1 S 2 S 3SELCharge Meter201: 00005SEL CLR NEXT201: 00001.15FRSEL CLR NEXT
