Station Programming 2-152.2 ProgrammingAll ClearAllows you to clear all recorded charge and set the new starting time for recording.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 9.2. Enter the ID Code (4 digits).• The display shows:• To erase an incorrect entry, press the CLR (S2) button.3. Dial 6.• The display shows;(— Sum: CO line, Total, Account codeand Department code Charge Fee)4. Press the NEXT (S3) button or the CLR (S2) button.— NEXT: displays the message of the extension meter clearing.(— Ext: Extension Charge Fee)— CLR: displays the last time of the specific information clearing.5. Press the STORE button.• Recorded charge will be all cleared and the present time will bedisplayed.6. Press the PREV ( ) button or END ( ) button.• PREV ( ) — return to step 4.• END ( ) — return to the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You must assign the ID code through System Programming.Charge MeterMeter Sum Clear?CLR NEXTMeter EXT Clear?CLR NEXT1 Jan, 16:50123459ID Codeor6...6S 1 S 2 S 3NEXTS 1 S 2 S 3CLRor
