2-16 Station Programming2.2 ProgrammingPrint the ChargeAllows you to print the charge of total telephone charge (total CO charge, each accountcode, each department code), total extensions charge or each extensions charge by SMDR.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 9.2. Enter the ID Code (4 digits).• The display shows:• To erase an incorrect entry, press the CLR (S2) button.3. Dial 7.4. Dial the number (1 through 3).• Each number corresponds to the data as follows;— 1: for printing total telephone charge (total CO charge, eachaccount code charge, each department code charge)— 2: for printing all extension charge— 3 + the extension number: for printing each extension charge( xxxx: extension number)5. Press the PREV ( ) button or END ( ) button.• PREV ( ) — return to step 4.• END ( ) — return to the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You must assign the ID code through System Programming.Charge MeterTotal CHG PrintEXT CHG Print1232: CHG Print12349ID Codeor571 2 3or or
