Account Code Charge Fee ReferenceProvides you with the display of each account code charge (telephone rate).— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 9.2. Enter the ID Code (4 digits).• The display shows:• To erase an incorrect entry, press the CLR (S2) button.3. Dial 4.4. Dial the account table number (01 through 40) or press the NEXT(S3) button until the account table number will be designated.• The display shows the meter.(— aaaaa: account code)5. Press the SEL (S1) button.• The display shows the charge.(— aaaaa: account code)• If you press the NEXT (S3) button, the next account table numberwill be displayed to advance.6. Press the PREV ( ) button or END ( ) button.• PREV ( ) — return to step 4.• END ( ) — return to the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You must assign the ID code through System Programming.2-12 Station Programming2.2 Programmingaaaaa:00005SEL CLR NEXTaaaaa:00001.15FRSEL CLR NEXT1234596ID Codeaccount table numberorS 1 S 2 S 3SELCharge Meter4
