CO Line Charge Fee ReferenceProvides you with the display of each CO line charge (telephone rate).— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Dial 9.2. Enter the ID Code (4 digits).• The display shows:• To erase an incorrect entry, press the CLR (S2) button.3. Dial 2.4. Dial the CO line number (01 through 08) or (01 through 24) or pressthe NEXT (S3) button until the CO line number will be designated.- 01 through 08 : if you are connected to the KX-TD816.- 01 through 24 : if you are connected to the KX-TD1232.• The display shows the meter. If you assign the CO line number 08.5. Press the SEL (S1) button.• The display shows the Charge.• If you press the NEXT (S3) button, the next CO line number willbe displayed to advance.6. Press the PREV ( ) button or END ( ) button.• PREV ( ) — return to step 4.• END ( ) — return to the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You must assign the ID code through System Programming.2-10 Station Programming2.2 ProgrammingAl08:00005SEL NEXTAl08:00001.15FRSEL NEXT1234596ID CodeCO line numberorS 1 S 2 S 3SELCharge Meter2
