Station Programming 2-312.2 Programming†: Available when the Digital Super Hybrid System is connected to aProprietary Telephone capable Panasonic Voice Processing System(one that supports proprietary telephone integration; e.g. KX-TVP100)Two-Way Transfer Button (Assignment)†Allows you to assign a Flexible (CO, DSS) button as a Two-Way Transfer button.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Press the desired Flexible (CO, DSS) button which you wish toassign as the Two-Way Transfer button.2. Dial 84.• The display shows:3. Enter the extension number of the Voice Mail.• The display shows:(— xxxx: VM extension number)• To erase the entry, press the CLR (S2) button or the TRANSFER(CLEAR) button.(The TRANSFER ( ) button becomes the CLEAR button when using theoverlay.)4. Press the STORE button.• The STORE indicator light turns on.• The display shows the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• You cannot enter a non-existent extension or a floating number.*• The voice mail extension number is acceptable, if the number is assigned in program [126].* Floating Number (FN) is a virtual extension number for resources to make it appear to be an extension.Refer to the Installation Manual.124...3VM extension number8 4 2 WAY-TRANS:CLR2 WAY-TRANS:xxxxCLR
