3-12 User Programming (Manager Programming)3.2 User Programming (Manager Programming)Extension Number Set003Description Assigns an extension number to each extension.Selection • Jack number: KX-TD816 – 01 through 16 (-1 / -2)KX-TD1232 – 01 through 64 (-1 / -2)(-1 = first part, -2 = second part)• Extension Number: 2 through 4 digitsDefault KX-TD816 – Jack 01-1 through 16-1 = 201 through 216Jack 01-2 through 16-2 = 301 through 316KX-TD1232 – Jack 01-1 through 64-1 = 201 through 264;Jack 01-2 through 64-2 = 301 through 364Programming 1. Enter 003.Display: EXT Number Set2. Press NEXT.Display: Jack NO?->3. Enter a jack number.To enter jack number 01, you can also press NEXT.To select the second part (-2), press NEXT after entering a jack number.Display: #01-1:EXT2014. Enter an extension number.To change the current entry, press CLEAR and the new number.5. Press STORE.6. To program another jack, press NEXT or PREV, or SELECT and thedesired jack number.7. Repeat steps 4 through 6.8. Press END.Conditions • There is a maximum of 32 extension numbers for KX-TD816 and 128extension numbers for KX-TD1232. Each extension number can be two,three, or four digits, consisting of 0 through 9. The and # keys cannot beused.• In case of KX-TD1232, Jack numbers 01 through 32 are for the MasterSystem and 33 through 64 are for the Slave, if available.
