3-14 User Programming (Manager Programming)3.2 User Programming (Manager Programming)Extension Name Set004Description Assigns names to the extension numbers programmed in program [003]“Extension Number Set.”Selection • Jack number: KX-TD816 – 01 through 16 (-1 / -2)KX-TD1232 – 01 through 64 (-1 / -2)(-1 = first part, -2 = second part)• Name: 10 characters (max.)Default All jacks – Not storedProgramming 1. Enter 004.Display: EXT Name Set2. Press NEXT.Display: Jack No?->3. Enter a jack number.To enter jack number 01, you can also press NEXT.To select the second part (-2), press NEXT after entering a jack number.Display: #01-1:Not Stored4. Enter a name.To delate the current entry, press CLEAR.To change the current entry, press CLEAR and the new name.5. Press STORE.6. To program another jack, press NEXT or PREV, or SELECT and thedesired jack number.7. Repeat steps 4 through 6.8. Press END.Conditions • There is a maximum of 32 names for KX-TD816 and 128 names for KX-TD1232. Each name has a maximum of 10 characters.• Program [003] “Extension Number Set” is used to assign extensionnumbers.• In case of KX-TD1232, Jack numbers 01 through 32 are for the MasterSystem and 33 through 64 are for the Slave, if available.• For an explanation of jack numbering, see “Rotation of jack number” onpage 3-5.
