Amplifier/Active SpeakerConnectionThis section describes how to connect an amplifier/active speaker.1. Connect the amplifier/active speaker to the AudioOut L/R jack on the back of the unit using a stereopin plug cable.Note• Connect the amplifier/active speakercorrectly, as follows:– Left channel ® L– Right channel ® R• For more details about the amplifier oractive speaker, refer to the documentationfor the corresponding device.Layout example:Place the speakers either side of the display, as follows:MicrophoneMainvideocameraDisplaySpeakerSpeakerNotice• Place the speakers either side of the display. Ifyou place the display at the front of the roomand the speakers at the back, the microphone’sleft/right spatial direction may be reversed, andthe orientation of the image and sound will notmatch on the other party’s side.Connecting the Display with aComponent CableIf your display does not have an HDMI terminal, use acomponent cable for connection.1. Connect the display to the Component terminal onthe back of the unit using a component cable.Note• To use the display’s speakers to output audio,connect the display to the Audio Out L/R jack(Page 16) on the back of the unit using a stereopin plug cable.User Manual 25Preparation
