Note• You can press [B] or [R] to switch the screen layout to that button’s pre-assigned layout.The layout displayed by each button depends on the screen layout currently in use.Display Screen LayoutOther Site Layout 1Both Sites Layout 2This Site Layout 3Example: When using Layout 2[B]: The screen layout will be switched to Layout 3.[R]: The screen layout will be switched to Layout 1.• When connecting to an MCU or non-Panasonic video conference system, images received from theother party may not be displayed in the correct aspect ratio (the ratio of the width of the image to itsheight). In this case, perform the following operation during the video conference call. (When the videoconference call ends, the aspect ratio will return to "Auto" [default].)1. Press [G].• The aspect ratio dialogue box is displayed.2. Use [ ][ ] to select "Auto" (default), "16:9", or "4:3".• A dialogue box showing the selected aspect ratio is displayed for about 3 seconds.• When connecting to an MCU, the MCU’s screen will be displayed as the other party’s image. You canchange the MCU’s screen layout remotely using tone signals (Page 44).46 User ManualChanging the Screen Layout
