• When a contact in the incoming call history isnewly added to your contact list, the incoming callhistory will be updated to display the contact’sinformation from the contact list.• When a party that is not registered in your contactlist is selected, if you press [B], the contact listregistration screen will be displayed and a newcontact can be registered (Page 84). If a hostname is displayed in the "Site" column, the partycannot be registered in your contact list. Also,you may not be able to register a SIP URI (or SIPuser name), H.323 extension, or H.323 namefrom the incoming call history to the contact listfor reasons such as non-compliance with therelevant standards. In this case, contact yournetwork administrator.3 Select the party you want to call using [ ][ ].Note• If you press [Enter], the call history detailsscreen is displayed.• When not selecting a local site (Page 114),"Local site name" will be blank.• The lowest bandwidth for the maximumbandwidth setting among all participating partiesis displayed in "Bandwidth". If the videoconference call was not established, themaximum bandwidth will be blank.• Depending on the other party, "Device type"may be blank.4 Press [Start] to start the call.5 When you want to end the call, press [End].• The Home screen is displayed.40 User ManualStarting a Video Conference
