Displaying a Still Image from the Sub Video CameraYou can display a still image from the sub video camera during a video conference call.Note• Fix your sub video camera and the object so that the image is not blurred.• You cannot perform this operation when using H.323 or connecting to an MCU or non-Panasonic videoconference system.1 Press [Camera Sub].• The sub video camera’s image is displayed.1 4322 Press [R].• The still image from your sub video camera isdisplayed on your display and the other party’sdisplay.Note• The image becomes gradually clear after a blackscreen is displayed for about 1 second.• If you press [R] while the still image is being sent,the image taken when you pressed [R] thesecond time is sent to other party’s displayagain.• If the network has low bandwidth and a high rateof packet loss, either it will take a long time todisplay a clear image, or a blurred image will bedisplayed.3 Press [G].• The display switches from the still image back to thenormal sub video camera image.Note• A black screen is displayed for about 1 secondafter you press [G].4 Press [Camera Main].• The screen returns to the main video camera’simage.User Manual 77Displaying Other Video Sources
