Calling by Entering an Address DirectlyYou can make a video conference call by entering the IP address, SIP URI (or SIP user name), H.323 extension,H.323 name, or MCU’s conference room number@IP address.1 Press [Menu].• The Menu screen is displayed.9 10162-57-82 Select "Manual Dial" using [ ][ ] and press[Enter].• The input screen is displayed.3 Select "Multi-Point" using [ ][ ].Note• If you are using the KX-VC300, you can select"Multi-Point" after purchasing an activation keycard (KX-VCS301) to activate multiple-partyvideo conference calls (Page 108). For detailsabout the activation key, contact your dealer.4 Select one of the following values using [ ][ ].2-party video conference call: "No"3-party video conference call: "2 sites"4-party video conference call: "3 sites"Note• When connecting to an MCU or non-Panasonicvideo conference system, you cannot make3-party/4-party video conference calls.• "H.323" cannot be selected for "Call Type" if 2or more sites are selected for "Multi-Point".5 Select "Site 1", "Site 2", "Site 3" using [ ][ ].6 Enter the IP address, SIP URI (or SIP user name), H.323 extension, H.323 name, or MCU’s conference roomnumber@IP address.7 Use [ ][ ] to select "Call Type".8 Use [ ][ ] to select "SIP" or "H.323".9 Press [Start] to start the call.• You can also start the call by pressing [Enter].36 User ManualStarting a Video Conference
