Menu Settings101VQT0X92• You can set the aperture value, the shutterspeed and the ISO sensitivity on thecamera even when attaching the externalflash.• Some commercial external flashes havesynchro terminals with high-voltage orreversed polarity. Using such extra flashesmay cause a malfunction or the cameramay not operate normally.• If you use commercially availableexternal flashes with communicationfunctions other than the dedicated one,they may not operate normally or theymay be damaged. Do not use them.• Even if the external flash is turned off,the camera may enter the external flashmode when the external flash isattached. When you are not using theexternal flash, detach it or set it toForced OFF.• When attaching the external flash, thebuilt-in flash cannot be activated.• Do not open the built-in flash when anexternal flash is attached.• When attaching the external flash, thecamera will become unstable.• Detach the external flash when carryingthe camera.• When attaching the external flash, do nothold only the external flash because itmay detach from the camera.• If you use the external flash when thewhite balance is set to [ ] finely adjustthe white balance depending on thepicture quality. (P85)• If you take pictures close to the subject inWide, the vignetting effect may appear onthe bottom of the recorded picture.• Read the operating instructions of theexternal flash for details.Press [ ] to display the [REC] modemenu and select the item to set. (P82)This mode allows you to take multiplepictures at one time when the extra flash isattached.• Set [EX.FLASH BURST] to [ON].• Press the Single/Burst Mode Button toswitch the burst mode setting.• You can take up to 3 pictures by keepingthe shutter button pressed down.w Number of pictures recorded in burstmode• Depending on the extra flash you use orthe recording conditions, you cannot takepictures in this mode or the amount oflight may become insufficient for thesecond or subsequent pictures.Press [ ] to display the [REC] modemenu and select the item to set. (P82)Change date and time. (P26)[EX.FLASH BURST]Taking pictures in burst modewhile firing the flashBurst speed(pictures/second)Number of recordablepictures (pictures)2max. 31Approx. 1[CLOCK SET]Set the date, time and displaySETMENUSETMENU
