Advanced54VQT0X92Optical ImageStabilizerThis mode detects jitter and compensatesfor it.1 Press and hold the optical imagestabilizer button until[STABILIZER] appears.2 Press to select thestabilizer function mode and thenpress [MENU/SET].w Demonstration of the optical imagestabilizer (Demonstration Mode)Press to display the demonstration. Afterthe demonstration ends, the screen returnsto the stabilizer function mode selectionmenu. Press again if you want to exit thedemonstration before it ends.While the demonstration is displayed, youcannot take pictures.While the demonstration is displayed, setthe optical zoom to Wide (1M).• The stabilizer function may not beeffective in the following cases.– When there is a lot of jitter.– When the zoom magnification is high.– In digital zoom range.– When taking pictures while following amoving subject.– When the shutter speed becomesslower to take pictures indoors or in darkplaces.Be careful of camera jitter when you pressthe shutter button.• The setting is fixed to [OFF] in[STARRY SKY] (P68) in scene mode. Thestabilizer function mode selection menudoes not appear.• In motion picture mode [ ] or[PANNING] in scene mode, [MODE2]cannot be set.[MODE1]( )The stabilizer operatescontinuously and can assistduring photo composition.[MODE2]( )The jitter is compensated forwhen the shutter button ispressed. There is a greaterstabilizing effect.[OFF]( )When you want to take apicture with jitter.STABILIZEROFFMODE2DEMO.SELECT SET MENUMODE1SETMENU
