Menu Settings107VQT0X92• DPOF print setting is a convenientfunction when printing pictures with aprinter that supports PictBridge. The dateprinting setting on the printer may takepriority over the date printing setting onthe camera. Check the date printingsetting on the printer also. (P115)• It is necessary to delete all previousDPOF print information made on otherequipment when setting DPOF print onthe camera.• If the file is not based on the DCFstandard, the DPOF print setting cannotbe set. DCF is an abbreviation of “Designrule for Camera File system”, stipulated by“JEITA (Japan Electronics and InformationTechnology Industries Association)”.Press [ ] to display the [PLAY] modemenu and select the item to set. (P102)You can set protection for pictures you donot want to be deleted by mistake.Press to select [SINGLE],[MULTI] or [CANCEL] and thenpress [MENU/SET].w Single setting1 Press to select the pictureand then press to set/cancel.2 Press [MENU/SET] twice to closethe menu.w Multi setting/To cancel all settingsPerform the same operation as in“[DPOF PRINT] Setting the picture to printand the number of prints”. (P105 to 107)• If you press [MENU/SET] while cancelingprotection, the canceling will stop halfway.• The protect setting may not be effectiveon other equipment.• If you want to delete protected pictures,cancel their protection.• Even if you protect pictures on a card,they will be deleted if the card isformatted. (P111)• Even if you do not protect pictures on anSD Memory Card or SDHC Memory Card ,they cannot be deleted when the card’swrite protect switch is set to [LOCK].• The following functions cannot be usedwith protected pictures.– [ROTATE]– [AUDIO DUB.][PROTECT]Preventing accidental erasure ofpicturesSETMENUSET MENUSELECTPLAY 2/3AUDIO DUB.RESIZETRIMMINGONOFFASPECT CONV.MULTISINGLECANCELPROTECTSETMENU[SET] The protect icon [ ]appears.[CANCEL] The protect icon [ ]disappears.SET/CANCELPROTECT THISSELECT1/3100_0001EXIT MENU32
