Preparation26VQT0X92Setting Date/Time(Clock Set)w Initial settingThe clock is not set so the following screenappears when you turn the camera on.: [MENU/SET] button: Cursor buttons1 Press [MENU/SET].2 Press to select thedate and time.: Time at the home area: Time at the travel destination (P73)• /: Select the desired item .• /: Set the display order for the dateand time.• Press [ ] to cancel the clock settingwithout storing the date and time.• Refer to [WORLD TIME] (P73) forinformation about setting the local timeat the travel destination area.3 Press [MENU/SET] several timesto close the menu.• Turn the camera off after finishingsetting the clock. Then turn it on andcheck that the clock setting is correct.w Changing the clock setting1 Press [MENU/SET].2 Press to select [CLOCK SET](P101 )3 Press and then perform steps 2 and3 to set the clock.• You can also set the clock in the[SETUP] menu. (P27)• When a fully charged battery has beeninserted for more than 24 hours, the clocksetting is stored (in the camera) for atleast 3 months even if the battery isremoved.• You can set the year from 2000 to 2099.The 24-hour system is used.• If the date is not set in the camera it willnot be printed correctly when you use aphoto printing service, even if the storeprovides a date printing option for yourphotographs. (P106)OFF ONPLEASE SET THE CLOCKCLOCK SET MENUM/D/YJAN 11 2006. .00 00:CLOCK SETSELECT SET EXIT MENU::CANCELEXIT MENUSELECTCLOCK SETREC 5/5
