Menu Settings99VQT0X92• The full range of the zoom can be usedwhen using the close-up lens.• Digital zoom cannot be used when using awide conversion lens.• When there is dirt (water, oil, andfingerprints, etc.) on the surface of thelens, the image may be affected. Lightlywipe the surface of the lens with a soft,dry cloth before and after taking pictures.• Ensure that [CONVERSION] is set to[OFF] when not using a conversion lens orclose up lens.• When using the conversion lens orclose-up lens:– If you set [CONVERSION] to [OFF], theperformance of the conversion lens orclose-up lens will not be optimal.• When using the tele conversion lens:–We recommend using a tripod.– The stabilizer function may not worksufficiently.– The focus indication may light due to thejitter even if the subject is not focused.– The time required for focusing maybecome longer than usual.• If you set [CONVERSION] to [ ], [ ] or[ ], you cannot use the built-in flash orAF assist lamp. (P91)• Read the operating instructions of theconversion lens for details.Press [ ] to display the [REC] modemenu and select the item to set. (P82)After attaching the external flash, theeffective range will be increased whencompared to the camera’s built in flash.w Using the dedicated flash(DMW-FL500/DMW-FL360; optional)1 Attach the dedicated flash to thehot shoe and then turn on thecamera and the dedicated flash.• Be sure to firmly secure to dedicatedflash with the lock ring .2 Press [ ].3 Press /to switch the flashsettings and then press[MENU/SET].C[EXT.FLASH]Using an optional flashSETMENUFLASHSELECT SET MENU SETMENUFORCED OFFFORCED FLASH ON
