|
Chapter 4 Settings — [SECURITY] menu104 - ENGLISH[SECURITY] menuOn the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.f When the projector is used for the first timeInitial password: Press awsqawsq in order, and press the button.f After selecting the item, press asqw to set.Attentionf When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password andthen continue operations of the [SECURITY] menu.f When the password has been changed previously, enter the changed password, and press the button.Notef The entered password is displayed with*marks on the screen.f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.[SECURITY PASSWORD]The [SECURITY PASSWORD] screen is displayed when turning the switch to and turning on the power. When theentered password is incorrect, the operation will be restricted to the power <v/b> button on the control panel and the power standby <v>button, button *1, and (, , and ) buttons on the remote control.*1 For PT-EZ580, PT-EW640 and PT-EX610 button for PT-EW540 and PT-EX5101) Press as to select [SECURITY PASSWORD].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the security password entry.[ON] Enables the security password entry.Notef In the factory default setting of after [ALL USER DATA] in [INITIALIZE] (x page 96) is executed, the [SECURITY PASSWORD] setting isset to [OFF].f Change the password periodically that is hard to guess.f The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the switch to .[SECURITY PASSWORD CHANGE]Change the security password.1) Press as to select [SECURITY PASSWORD CHANGE].2) Press the button.f The [SECURITY PASSWORD CHANGE] screen is displayed.3) Press asqw and the number (<0> - <9>) buttons to set the password.f Up to eight button operations can be set.4) Press the button.5) Re-enter the password for the confirmation.
|
