Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 77[WIDE] Select when an image aspect ratio is a wide-screen signal, which does not meet the [DEFAULT]settings.[USER] Select when receiving a signal with a special horizontal resolution (number of display dots).f When [DEFAULT] or [WIDE] is selected, proceed to Step 7).f When [USER] is selected, proceed to Step 5).5) Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontalresolution of the signal source.6) Press as to select [MODE].7) Press the button.f Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the[AUTO SETUP] screen.Adjusting position automatically1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [POSITION ADJUST].4) Press qw to switch the item.[ON] Adjust the screen position and size when automatic setup is executed.[OFF] Does not perform automatic adjustment.Adjusting signal level automatically1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [SIGNAL LEVEL ADJUST].4) Press qw to switch the item.[OFF] Does not perform automatic adjustment.[ON] Adjusts black level (on-screen menu [BRIGHTNESS]) and white level (on-screen menu[CONTRAST]) when automatic setup is executed.Notef [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.[RGB IN]Set to match the signal to input to the terminal and terminal.Switching the slice level of an input sync signal1) Press as to select [RGB IN].2) Press the button.f The [RGB IN] screen is displayed.3) Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].4) Press qw to switch the item.[LOW] Sets the slice level to [LOW].[HIGH] Sets the slice level to [HIGH].
