Chapter 2 Getting Started — Setting up30 - ENGLISHSetting upInstallation modeThere are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 86) depending onthe installation method.Mounting on the ceiling and projecting forward Setting on a desk/floor and projecting from rear(Using the translucent screen)Menu item Method Menu item Method[PROJECTION METHOD] [FRONT/CEILING] [PROJECTION METHOD] [REAR/FLOOR]Mounting on the ceiling and projecting from rear(Using the translucent screen)Setting on a desk/floor and projecting forwardMenu item Method Menu item Method[PROJECTION METHOD] [REAR/CEILING] [PROJECTION METHOD] [FRONT/FLOOR]Parts for ceiling mount (optional)You can install the projector on the ceiling using the optional Ceiling Mount Bracket (Model No.:ET-PKD120H (for High Ceilings), ET-PKD120S(for Low Ceilings), ET-PKE300B (Projector Mount Bracket) or ET-PKE200H (for High Ceilings), ET-PKE200S (for Low Ceilings), ET-PKE200B(Projector Mount Base). *1f Be sure to use the Ceiling Mount Bracket specified for this projector.f Refer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector with the bracket.*1 Be sure to read “Precautions for Ceiling Mount Bracket” (x page 153)Attentionf To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualifiedtechnician.
