Panasonic PT-EZ580 Operating Instructions Manual

Also see for PT-EW540: Operating instructions (functional manual)

Contents

Panasonic PT-EZ580 Operating Instructions Manual Manual pdf 75 page image

Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 75[DISPLAY OPTION] menuOn the menu screen, select [DISPLAY OPTION] from the main menu, and select an item fromthe sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.f After selecting the item, press asqw to set.[COLOR ADJUSTMENT]Correct the color difference between projectors when using multiple projectors simultaneously.1) Press as to select [COLOR ADJUSTMENT].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Color adjustment is not carried out.[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE].[7COLORS] Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].3) Select [3COLORS] or [7COLORS], and press the button.f The [3COLORS] or [7COLORS] screen is displayed.4) Press as to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],[YELLOW], or [WHITE] for [7COLORS]).5) Press the button.f The [3COLORS:RED], [3COLORS:GREEN], or [3COLORS:BLUE] screen is displayed.For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.6) Press as to select [RED], [GREEN], or [BLUE].7) Press qw to adjust.f The adjustment value changes between 0*1 and 2 048.*1 The lower limit varies depending on the adjusting color.Notef Operation when correcting the adjustment colorWhen the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.When correction color red is changed: Red is added to or subtracted from the adjustment color.When correction color green is changed: Green is added to or subtracted from the adjustment color.When correction color blue is changed: Blue is added to or subtracted from the adjustment color.f This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill isrequired to make a successful adjustment.f Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.f Pressing the button on the remote control will restore the factory default settings for all items.f If [COLOR ADJUSTMENT] is set to other than [OFF], [COLOR CORRECTION] is fixed to [OFF], and [COLOR TEMPERATURE] is fixed to[USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)[COLOR CORRECTION]Colors can be adjusted and registered for each input signal format.1) Press as to select [COLOR CORRECTION].2) Press qw to switch the item.f The items will switch each time you press the button.