Chapter 3Basic Operations—Operating with the remote controlENGLISH - 51Operating with the remote controlFor PT-EZ580, PT-EW640and PT-EX610For PT-EW540and PT-EX510Switching the inputThe input for projection can be switched.button1)Press the input selection (, , , buttons.fThis operation can be also performed using the button on the control panel.Switches the input to RGB1 or RGB2. Switches to another input when one input has already beenchosen.*1Switches the input to DIGITAL LINK.Switches the input to DVI-D.Switches the input to VIDEO.*1Switches the input to DisplayPort.Switches the input to HDMI.*1Only for PT-EZ580, PT-EW640 and PT-EX610NotefWhen the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the terminal, the ET-YFB100Ginput changes with each press of the button. The input can also be changed using the control command of RS-232C.For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input onthe twisted-pair-cable transmitter.Using the SHUTTER/AV MUTE buttonIf the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image andaudio temporarily.* button(Only for PT-EZ580, PT-EW640 and PT-EX610)button1)Press the button.fThe image and audio disappear.fThis operation can be also performed using the button on the control panel.
