Chapter 2 Getting Started — ConnectingENGLISH - 41Notef When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu →[DVI-D IN] → [EDID].f The terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not bedisplayed properly on some devices.f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standardsis used, images may be interrupted or may not be displayed.f The terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversioncable, but some devices may not project the image properly or function properly.f The projector does not support VIERA Link (HDMI).Connecting example: ComputersControl computer ComputerComputerComputerComputerControl computerAttentionf When connecting the projector to a computer or an external device, use the power cord supplied with each device and commerciallyavailable shielded cables.Notef When entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu →[DVI-D IN] → [EDID].f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standardsis used, images may be interrupted or may not be displayed.f The terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversioncable, but some devices may not project the image properly or function properly.f The terminal supports single links only.f For the DisplayPort cable, use a DisplayPort cable that conforms to DisplayPort standards. If a cable that does not conform to DisplayPortstandards is used, the image may be interrupted or may not be displayed (Only for PT-EZ580, PT-EW640 and PT-EX610).f When entering the SYNC ON GREEN signal, do not enter sync signals to the terminal or the terminal.f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operatethe projector.
