Chapter 4 Settings — [SECURITY] menuENGLISH - 1056) Press the button.Notef The entered password is displayed with*marks on the screen.f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost.Consult your dealer for the initialization method.[DISPLAY SETTING]Overlap the security message (text or image) over the projecting image.1) Press as to select [DISPLAY SETTING].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] The text display is disabled.[TEXT] The text display is enabled.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[TEXT CHANGE]Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].1) Press as to select [TEXT CHANGE].2) Press the button.f The [TEXT CHANGE] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f The text is changed.[MENU LOCK]Display the menu by the 1) Press as to select [MENU LOCK].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Unlocks menu operations.[ON] Locks menu operations.Notef When the entered password is incorrect after setting [MENU LOCK] to [ON], the f [MENU LOCK] is set to [OFF] at the time of purchase or when [ALL USER DATA] in [INITIALIZE] (x page 96) is executed.f When [MENU LOCK] is set to [ON], after entering the password to release the lock, the unlock state is held until the projector enters thestandby mode.[MENU LOCK PASSWORD]The menu lock password can be changed.1) Press as to select [MENU LOCK PASSWORD].2) Press the button.f The [MENU LOCK PASSWORD] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f To cancel, select [CANCEL].
