Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 832) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [SHUT-OFF].4) Press qw to switch the item.[KEEP CURRENT STATE] When the projector is switched off, the projector turns into standby with the shutter status as is.[OPEN] When the projector is switched off, the projector turns into standby with the shutter left opened.[CLOSE] When the projector is switched off, the projector turns into standby with the shutter left closed.[P-TIMER]Set and operate the presentation timer function.Setting the mode1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.[COUNT UP] Displays the elapsed time since the count was started.[COUNT DOWN] Displays the remaining time of the time set by [TIMER].Setting the timer1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.3) Press as to select [TIMER].4) Press qw to set the time.f The time can be set in 1-minute increments from 1 to 180 minutes.f The factory default value is 10 minutes.Notef [TIMER] is enabled when [MODE] is set to [COUNT DOWN].Using the presentation timer1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.3) Press as to select the item, and press the button.[START] The count is started.[STOP] The count is stopped.[RESTART] The count is resumed.[RESET] The count is reset.f When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the projectedimage.f When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the bottom right of theprojected image.f When [RESET] is selected, proceed to Step 4).
