Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 30 page image

2. Press the JogDial (SET) to validate the selection.3. Press the [D] or [C] button to select the next item, orpress the [SETUP/ESC] button to quit the display setup.● Disk Check HDD CHECKS.M.A.R.T. (Self-Monitoring Analysis and ReportingTechnology) is activated or deactivated for HDD check.1. Select either ON or OFF with the JogDial.The default is OFF.ON 0:00-23:00: The recorder checks the HDD at thespecified time every day.OFF: Check is deactivated.2. Press the JogDial (SET) to validate the selection.3. Press the [D] or [C] button to select the next item, orpress the [SETUP/ESC] button to quit the display setup.Note: Recording will resume after one-second intermis-sion when HDD is checked.● Camera Title CAMERA TITLECamera title and display position are specified for eachcamera.1. In the DISPLAY SETUP menu, move the cursor to CAM-ERA TITLEO, and press the JogDial to open the CAM-ERA TITLE menu.2. Move the cursor to the camera you wish to programusing the [D] or [C] button.30● Disk Capacity Warning HDD FULLThe recorder observes the disk capacity to warn the opera-tor that the available capacity is nearing the end whenSTOP is selected for DISK END MODE. There are two warn-ing levels. First, the FULL indicator on the front panel blinkswhen the remaining capacity has reached the preset value.Finally, the buzzer beeps when the disk is full, provided thatthe DISK END BUZZER parameter in the SYSTEM SETUP isset to ON. At the same time, the FULL indicator turns on.1. Select the desired value with the JogDial.The default is 1 %.1% – 99%: The FULL indicator blinks when the remain-ing capacity reaches the selected value.2. Press the JogDial (SET) to validate the selection.3. Press the [D] or [C] button to select the next item, orpress the [SETUP/ESC] button to quit the display setup.● Remote LED REMOTE LEDThe remote LED on the front panel will indicate or ignorethe remote controlling status to the recorder via the net-work.1. Select either ON or OFF with the JogDial.The default is OFF.ON: REMOTE LED turns on when the network controlsthe recorder.OFF: REMOTE LED is deactivated.DISPLAY SETUPCLOCK→ JUN30.03 15:05TIME&DATE TYPE1 24HTIME&DATE DISP.ONTIME&DATE POSI.R-LOWERSTATUS DISP. ONSTATUS POSI. R-LOWERHDD FULL 1%REMOTE LED ONHDD CHECK 0:00CAMERA TITLEODISPLAY SETUPCLOCK→ JUN30.03 15:05TIME&DATE TYPE1 24HTIME&DATE DISP.ONTIME&DATE POSI.R-LOWERSTATUS DISP. ONSTATUS POSI. R-LOWERHDD FULL 1%REMOTE LED ONHDD CHECK 0:00CAMERA TITLEO → → DISPLAY SETUPCLOCK→ JUN30.03 15:05TIME&DATE TYPE1 24HTIME&DATE DISP.ONTIME&DATE POSI.R-LOWERSTATUS DISP. ONSTATUS POSI. R-LOWERHDD FULL 1%REMOTE LED ONHDD CHECK 0:00CAMERA TITLEO