60REC: Records the camera channel regardless of alarm-activated or non-alarm status.■ Manual Recording SetupREC SETUPManual recording will take effect when OFF, neither INT norEXT, is selected in the Timer Mode Selection TIME RECwindow. The parameters for alarm recording will be appliedexcept the scheduled time zone if INT is selected.Click the REC SETUP button in the setup control panel toopen the window.Refer to ● Recording Mode Setup PROG “1-4” NO. “1-4”SETUP, for operating procedures and available parame-ters.■ Externally Specified RecordingMode EXT REC SETUPThis window specifies the recording mode and parametersthat will be changed when externally connected switch toEXT REC terminal is turned on.Refer to ● Recording Mode Setup PROG “1-4” NO. “1-4”SETUP, for operating procedures and available parame-ters.■ Display Setup DISPLAY SETUPTime and date display and other displays of status informa-tion are specified in this window.8 Clock Setup (CLOCK SETUP)Select a month, and type a day, year, hour, and minute.8 Time and Date type (TIME&DATE)TYPE1 24H: Time and date are displayed in one line inthe 24-hour system.TYPE1 12H: Time and date are displayed in one line inAM-PM system.TYPE2 24H: Time and date are displayed in two lines inthe 24-hour system.TYPE2 12H: Time and date are displayed in two lines inthe AM-PM system.8 Time and Date Display (TIME&DATE DISPLAY)ON: Time & date display is enabled.OFF: Time & date display is disabled.8 Time and Date Position (TIME&DATE POSITION)Right-Lower: Displays time & date in the right lowercorner.Right-Upper: Displays time & date in the right uppercorner.Left-Lower: Displays time & date in the left lower cor-ner.Left-Upper: Displays time & date in the left upper cor-ner.