Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 41 page image

41VM*WR2 Writing error on HDDMaster HDDMaster HDDSlave HDDRV2EMPRV1HD1HD2POWERRPower disconnection due toelectricity failure/trouble hasbeen detected.THE Thermal error Temperature exceeds theoperating range.■ System InformationSYSTEM INFORMATION● HDD Hour Meter HDD HOUR METERThe meter shows how many hours each hard disk has beenoperated in playback, recording and idle. The built-in HDDneeds replacement when the hour meter reads around 30000 H.● HDD Capacity HDD CAPACITYThe total usable capacity of the built-in hard disk is indicat-ed.● Default DEFAULTThis enables the recorder to restore all setup data to thedefault values.1. Press the JogDial to move the cursor to DEFAULT.2. When the cursor is on SET→, press the JogDial again.3. Select YES or NO with the JogDial, and press theJogDial.The default is NO.NO: Current setup data is retained.YES: Current setup data is reset to the default values.When all setup data are reset to the default, “SETDONE” is displayed for a few seconds, and it turns toSET→.Note: The recorder will restart when the network setup hasbeen changed and the menu is closed.● System Version SYSTEM VERSIONThis line displays the version number of the installed sys-tem software. Version number will help you when updatingthe software.● System Log SYSTEM LOGThe system log is listed on the monitor with event number,date, time, and cause.SYSTEM INFORMATIONHDD1 HOUR METER 10000HHDD2 HOUR METER 10000HHDD CAPACITY 135.95GDEFAULT→ SET→SYSTEM VERSION X.XXSYSTEM LOGOAbbreviation Cause DescriptionSYSTEM LOG (1 OF 10)NO. DATE TIME CAU99 FEB28.03 6:50:06 WR198 FEB28.03 5:23:51 HD197 FEB20.03 10:10:23 HD296 FEB15.03 23:50:42 RV195 FEB11.03 23:52:10 EMP94 JAN31.03 19:43:32 THE93 JAN30.03 19:50:14 LS192 JAN15.03 19:52:54 TM291 JAN10.03 10:40:22 TM490 JAN01.03 10:50:20 LS1WR1 Writing errorHDD automati-cally removed Slave HDDS.M.A.R.Tdetects onerror on HDD.HDD empty Warning, HDD is nearing tothe end.TM* ALMTerminal alarm event waslogged, but no picturerecorded. * = 1-8VMD VMD event was logged, butno picture recorded. * = 1-8LS* LOSS Video input loss on channel# (*). * = 1-8PC* PC Alarm has been input fromthe PC.PowerError Errors other than shownabove