313. Select either ON or OFF with the JogDial.The default is ON for all cameras.ON: Enables camera title display, title registration, andposition selection.OFF: Disables the camera title functions.4. Press the JogDial (SET) to validate the selection.When on is selected, go to the following steps. The cur-sor moves to the title edit area.When off is selected, return to step 2 above, or pressthe [SETUP/ESC] button to escape from the CAMERATITLE menu.5. 5-1 Select a character for the digit with the JogDial.Each title is identical to the camera number: 1, 2, 3,and so forth as the default.Available characters are as follows.0 ~ 9 A ~ Z ! % &( ) * – / : . ?← → ↑ ↓ •5-2 Press the JogDial to validate the selection for thedigit.The selected character is displayed on the digit,and the cursor goes to the right digit.5-3 Press the [SETUP/ESC] button to move the cursorback to the previous digit.5-4 Repeat steps 5-1, 5-2 and 5-3 until all digits areentered.5-5 Press the JogDial when the cursor is on the rightend digit to validate the entered title. The cursormoves to POSI. column.Note: A bullet (centered dot) stands for a space, usedfor deleting entered characters.6. Select a display position with the JogDial.The default setting for camera 1, 2, 5, and 6 is R-LOWER, for camera 3, 4, 7, and 8 is R-UPPER.R-LOWER: Displays the camera title in the right lowercorner.R-UPPER: Displays the camera title in the right uppercorner.L-LOWER: Displays the camera title in the left lowercorner.L- UPPER: Displays the camera title in the left uppercorner.Note: When 9-split screen is displayed, the camera titleposition is fixed to R-LOWER.7. Press the [D] or [C] button to select the next item, orpress the [SETUP/ESC] button to quit the display setup.■ System Setup SYSTEM SETUPThere are two pages of the system setup. To turn a newpage, continue to move the cursor with the [D] or [C] but-ton.● Password Lock Setup PASSWORDLOCKA five-digit password is entered to protect all settings,recorded pictures, and operating status against erroneousoperation and tampering. Settings alone can be also pro-tected from unauthorized access. While the LOCK indicatoron the front panel is on, a message “NOW KEY LOCKED!”is displayed to warn unauthorized operators. If accessed inthis condition, the buzzer beeps.1. Move the cursor to PASSWORD LOCK with the [D] or[C] button.OPERATEALARMSUSPENDRESET OSDTIMER DSTREMOTELOCK SESYSTEM SETUP (1 OF 2)PASSWORD LOCK OFFALL→ *****OPERATION→ *****KEYLOCK BUZZ ONSKIP ALM-RECALL 5PAGESIMUL REC&PLAY ONALTER DETECT OFFDISK END MODE CONTINUEDISK END BUZZ ONSYSTEM SETUP (1 OF 2)PASSWORD LOCK OFFALL→ *****OPERATION→ *****KEYLOCK BUZZ ONSKIP ALM-RECALL 5PAGESIMUL REC&PLAY ONALTER DETECT OFFDISK END MODE CONTINUEDISK END BUZZ ONSYSTEM SETUP (2 OF 2)PLAY PRIORITY LOCALTIME ADJUST SETUPOAUTO ERASING OFF
