Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 65 page image

66SNMP System NameEnter from the keyboard.SNMP System LocationEnter from the keyboard.Click the [SET] button if all are adequately set.The WJ-HD200 will restart, and you will be requested toenter the URL as described earlier in Main Page andControl Panel.■ Switcher Setup SWITCHERSETUPThis window specifies sequence setups only for WJ-HD200.Browser's sequence is set up in the LIVE SEQUENCESETUP in page 71.8 Common Setup (COMMON SETUP)Start Display (START DISPLAY)The image in the selected form will be displayed on themonitor when the unit is turned on.Single Image: CH 1 – CH 8Quad Image: QUAD-A (including 1-4), QUAD-B(including 5-8)Multi Image: 9-SCREEN (including 1-8)Sequence: SPOT SEQUENCE, MULTI SEQUENCEMulti-screen Selection Mode (MULTI SELECT MODE)When the [MULTI SCREEN SELECT] button on the frontpanel is pressed, the monitor display will change as fol-lows depending on the selection.QUAD ONLY: QUAD-A → QUAD-B → QUAD-AALL: QUAD-A → QUAD-B → 9-SCREEN → QUAD-A8 Multi-screen Sequence Setup(MULTI SEQUENCE SETUP)Sequence Timing (SEQUENCE TIMING)INT: The preset time to the internal timer allows thesequence to step forward.EXT: SEQ IN signal to the rear panel allows thesequence to step forward.Auto Skip (AUTO SKIP)ON: The sequence skips the step where no video isinput.OFF: The sequence does not skip the step.Click the button to open the Multi Sequence Setup window.8 Spot-screen Sequence Setup(SPOT SEQUENCE SETUP)Sequence Timing (SEQUENCE TIMING)INT: The preset time to the internal timer allows thesequence to step forward.EXT: SEQ IN signal to the rear panel allows thesequence to step forward.Auto Skip (AUTO SKIP)ON: The sequence skips the step where no video isinput.OFF: The sequence does not skip the step.Click the button to open the Spot Sequence Setup window.8 Camera View Setup (CAMERA VIEW SETUP)Click the button to open the Camera View Setup window.■ Multi Sequence Setup MULTISEQUENCE SETUP8 Camera Channel (CAMERA CH)1 - 8: The selected camera image will be displayed insingle spot mode.QUAD A: Camera image 1 through 4 will be displayedin quad-split mode.QUAD B: Camera image 5 through 8 will be displayedin quad-split mode.8 Time (TIME)Available duration: 2-30 SClick the [SET] button if all are adequately set.