Panasonic aw-he40 series Operating Instruction

Also see for aw-he40 series: Installation & setup guide Quick start guide Quick start guide Manual Quick start guide

Contents

12What to do when encountering problems inthe basic shooting operationsIf the trouble is not resolved by taking the action suggestedbelow, refer to “Troubleshooting” (page 124).When performing the operationsusing the wireless remote controlThe unit does not move.● Press the [CAM1], [CAM2], [CAM3] or [CAM4] button toselect the unit which is to be operated.If only one unit is being used, it is normally selected usingthe [CAM1] button.● Check that the IR ID has been set correctly. (page 47,page 84)● If the unit’s status display lamp is off or lights up orange, itmeans that the unit’s power is not on.Refer to “Turning the power on” (page 7), and turn on thepower.● If the unit’s status display lamp does not blink even whenthe wireless remote control is operated near the unit’swireless remote control signal light-sensing area, it meansthat the wireless remote control’s batteries have run down.Replace the batteries.Multiple color bands (color bars) aredisplayed.Press the [MODE] button to switch to the camera picture.The menu screen is displayed.Press the [MENU] button for 2 seconds to exit the cameramenu.The lens focus is not adjusted automatically.Press the [A/FOCUS] button to switch to auto focusing.The camera picture is too light or too dark.1. Press the [A/IRIS] button to switch the lens irisadjustment to auto.2. Press the [AUTO] button of [GAIN] to switch the gainadjustment to auto.Something is wrong with the coloring of thecamera pictures.Refer to “Auto tracking white adjustment (ATW)” (page 19),and switch to “ATW”.When performing the operations using the controllerThe unit does not move.● Select the unit to be operated by following the procedurebelow.When using an AW-RP50, AW-RP120 or AK-HRP200:Refer to the Operating Instructions of the controller.● If the unit’s status display lamp is off or lights up orange, itmeans that the unit’s power is not on.Refer to “Turning the power on” (page 7), and turn onthe power.Multiple color bands (color bars) aredisplayed.Press the [BARS] button to switch to the camera picture.The menu screen is displayed.Press the [CAMERA OSD] button to exit the camera menu.The lens focus is not adjusted automatically.Press the [AUTO] button for focus control to switch to autofocusing.The camera picture is too light or too dark.● Press the [AUTO] button for IRIS to switch to auto lens irisadjustment.● Press the [AUTO] button for GAIN to switch to auto gainadjustment.Something is wrong with the coloring of thecamera pictures.Refer to “Auto tracking white adjustment (ATW)” (page 19),and switch to “ATW”.