Panasonic aw-he40 series Operating Instruction

Also see for aw-he40 series: Installation & setup guide Quick start guide Quick start guide Manual Quick start guide

Contents

25Basic operations (continued)■Operations on the AW-RP50 Remote Camera ControllerPOWER ALARM F1 CAMERAOSDR/B GAIN R/B PEDSYSTEMSETUPCAMERASCENE/MODEDETAILDELETESTOREPAGEMENU F2 EXITUSER2USER1PT ACTIVEAUTOIRISAUTOHILOWPTZ/FOCUS SPEEDFOCUS/PUSH OAFTELEZOOMWIDECAMERA STATUS / SELECTIONPRESET MEMORY / MENUGAIN/PEDF2F11 2 3AWB/ABB4SHUTTER51 2 3 4 56 7 8 9 10For operating the camera menus.CAMERA OSD:When this is pressed for 2seconds, the selected cameramenu is displayed, overlappingthe camera output image. Whenit is pressed for 2 seconds whilea camera menu is displayed, themenu is exited.F1:Turn F1 to move the cursor up anddown in the camera menu or tochange setting values. Press F1 tomove to the next level of a menuitem or to change a setting valueat the lowest level.For selecting the cameras to be operated.●Camera menu operation1 Press the appropriate [CAMERA STATUS/SELECTION] button to select the unit you wantto operate.2 Press and hold the [CAMERA OSD] button onthe AW-RP50 for about 2 seconds.The AW-HE40 camera menu appears on the monitor.3 Turn the F1 dial to select an AW-HE40 cameramenu item or to change a setting value.Turn the F1 dial to move the cursor up and down or tochange setting values.Press the F1 dial to move to the next level of a menuitem or to change a setting value at the lowest level.4 To exit the camera menu, press and hold the[CAMERA OSD] button for about 2 seconds.●Switching between Day and Night mode1 Press the [MENU] button on the AW-RP50.The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable.2 Press the [9 (SETUP)] button in the [PRESETMEMORY/MENU] area.The button lights, and the SETUP menu appears on theLCD panel.3 Turn the F1 dial to select “FUNCTION”, thenpress the F1 dial.4 Turn the F1 dial to select “OPTION”.“Off” or “On” appears on the bottom right (F2 area) of theLCD panel.5 Turn the F2 dial to select “Off” or “On”, thenpress the F2 dial.Off: Day modeOn: Night mode● Auto mode cannot be specified with this operation.