Panasonic aw-he40 series Operating Instruction

Also see for aw-he40 series: Installation & setup guide Quick start guide Quick start guide Manual Quick start guide

Contents

88Web screen configurations (continued) Host authentication screen [Host auth.]Click the [Host auth.] tab of User mng. screen [User mng.].Configure the host authorization settings that restrict thepersonal computers (IP addresses) that can access the unit.Host auth.Host authorization is set to “On” or “Off” here.Factory settings: OffIP addressThe IP address of the personal computer from whichaccess to the camera is allowed is input here. The hostname cannot be input as the IP address.● When the “IP address/subnet mask length” is input,the personal computers which are allowed to accessthe camera can be restricted on a subnet by subnetbasis.If, for instance, “192.168.0.1/24” has been input andthe [2. Camera control] setting has been selected asthe [Access level] setting, the personal computersfrom “192.168.0.1” to “192.168.0.254” will be ableto access the camera at the [2. Camera control]access level.● When an already registered IP address is input andthe [Set] button is clicked, the host information willbe overwritten.NotesAccess levelSelect one of the following settings as the host accesslevel.Setting value:1. Administrator This access level allows the user toperform all the unit’s operations.2. Camera control This access level allows you to displayimages and control the unit. The unitcannot be set.Factory settings: 2. Camera controlHost checkYou can view registered host IP addresses by clickingfor [Host check].A host is indicated in the form of “Registered IP address[Access level]”. (Example: 192.168.0.21 [1])You can delete selected hosts (IP addresses) by clickingthe [Delete] button at the right. Priority stream screen [Priority stream]Click the [Priority stream] tab of User mng. screen [Usermng.].Selected on this screen are the settings for the prioritystream which enables the images to be sent with noreduction in image quality or image refresh speed evenwhen a multiple number of users are accessing the unit atthe same time.z Priority streamActivationWhether to use priority stream transmission is set hereusing “On” or “Off”.Factory settings: Off● When [Activation] is set to [On], the number of usersthat can access the unit may be restricted.NoteDestination IP address (1)The IP address of the first send destination is input here.Destination IP address (2)The IP address of the second send destination is inputhere.Stream TypeSelect the stream type.Setting value:JPEG(1) JPEG(1) images are sent.JPEG(2) JPEG(2) images are sent.JPEG(3) JPEG(3) images are sent.H.264(1) H.264(1) images are sent.H.264(2) H.264(2) images are sent.H.264(3) H.264(3) images are sent.H.264(4) H.264(4) images are sent.Factory settings: JPEG(1)