Panasonic aw-he40 series Operating Instruction

Also see for aw-he40 series: Installation & setup guide Quick start guide Quick start guide Manual Quick start guide

Contents

87Web screen configurations (continued)User management screen [User mng.]The users and personal computers (IP addresses) thatcan access the unit from personal computers and mobileterminals are registered in the User mng. screen [User mng.]. User authentication screen [User auth.]Click the [User auth.] tab of User mng. screen [User mng.].Configure the user authorization settings for the personalcomputers and mobile terminals that can access the unit.User auth.User authorization is set to “Off” or “On” here.Enter the setting using the [Set] button.Factory settings: OffAuthenticationSpecify the method of user authentication to use.Setting value:Basic Use basic authentication.Digest Use digest authentication.Factory settings: Basic● If you change the Authentication setting, close thebrowser and perform access again.● When [User auth.] is set to [On], network connectionwith the AW-RP50 will be disabled.● When [User auth.] is set to [On] while[Authentication] is set to [Digest], networkconnection with the AW-RP50, AW-RP120, andAK-HRP200 will be disabled.NotesUser name [1 to 32 half-size characters]The user name is input here.Enter the setting using the [Set] button.● For details of usable characters, refer to page 66.PasswordRetype password [4 to 32 half-size characters]The password is input here.Enter the setting using the [Set] button.Access levelSelect one of the following settings as the user accesslevel.Enter the setting using the [Set] button.Setting value:1. Administrator This access level allows the user toperform all the unit’s operations.2. Camera control This access level allows only Live screenoperations to be performed.Factory settings: 2. Camera controlUser checkA pull-down menu can be opened here, and the registeredusers checked.A registered user is indicated in the form of “Registereduser name [Access level]”. (Example: admin[1])To delete a registered user, select the user to be deleted,and click the [Delete] button on the right.Up to 9 users can be registered as users.