Panasonic aw-he40 series Operating Instruction

Also see for aw-he40 series: Installation & setup guide Quick start guide Quick start guide Manual Quick start guide

Contents

67Web screen configurations (continued) SD card tab [SD memory card]Configure the format settings for the video to be recorded toan SD card or initialize a card.● The priority mode needs to be set to “SD card”. Fordetails, refer to “Priority mode tab [Priority Mode]”(page 65).Recording formatSet the size, frame rate, and bit rate of the video to berecorded to an SD card.Setting value:[When 59.94 Hz has been set as the unit’s frequency]1920x1080/59.94p 28Mbps1920x1080/29.97p 15Mbps1920x1080/29.97p 10Mbps1920x1080/29.97p 6Mbps1280x720/59.94p 15Mbps1280x720/29.97p 8Mbps1280x720/29.97p 4Mbps1280x720/29.97p 2Mbps[When 50 Hz has been set as the unit’s frequency]1920x1080/50p 28Mbps1920x1080/25p 15Mbps1920x1080/25p 10Mbps1920x1080/25p 6Mbps1280x720/50p 15Mbps1280x720/25p 8Mbps1280x720/25p 4Mbps1280x720/25p 2MbpsRecord tallyTurn the function for the tally lamp to light when recordingto an SD card on/off.Factory settings: OffRemaining capacity(Remaining capacity/Original capacity)Displays the remaining capacity and total capacity of theSD card.● Capacity is indicated in GB. If a card is not inserted orrecognized, “--- GB” is displayed.● The correct capacity may not be displayed immediatelyafter an SD card is formatted (initialized) or if an SDcard is inserted after opening the SD card tab. If thathappens, click the [Reload] button.FormatWhen you click the [Execute] button, a confirmationmessage appears.When you click the [OK] button, the SD card is formatted(initialized).● Recording to an SD card is not possible duringformatting.● If you perform formatting, all of the data stored onthe SD card will be deleted.● Do not turn off the power of the unit duringformatting.Notes