KW9M Eco-POWER METER17Transmission format FMT*Select [8b-E] when [645] is set for the protocol.Select serial communication (RS485) transmission format (Data length, Parity).Define the transmission format according to the master’s (PLC etc.).Press - △>, ▽> to select.[Set list] 8b-o (8bit odd), 8b-n (8bit none), 8b-E (8bit even) (initial: 8b-o)Stop bit STOP*Select [1] when [645] is set for the protocol.Select serial communication (RS485) stop bit.Press
- △>, ▽> to select.[Set list] 1, 2 (initial: 1)Response time RESP*Select 50 or more when [645] is set for the protocol.Set serial communication (RS485) response time of main unit.When command is received, it sends response after setting response time passes.Press
- △>, ▽> to set.[Set range] 1 to 99 ms (initial: 5)increasedecrease
