KW9M Eco-POWER METER385.1.12 Conversion value for integral export power・The conversion value for the present integral export active power (-P) is displayed.(Only total conversion value is displayed for 3P3W.)・Press ▽> to change total, phase 1 (1 st circuit), phase 2 (2 nd circuit) and phase 3 (3rd circuit).<1P2W/1P3W/3P4W>Total Phase 1 (1st circuit) Phase 2 (2nd circuit) Phase 3 (3rd circuit)<3P3W>Total*The conversion value exceeds “99999999”, “－－－－－－－－” is displayed.5.1.13 Temperature・The present temperature is displayed.・Temperature measuring function is the simple function Use this only to check temperature trendand do not use for control.・It measures by built-in thermistor, therefore it differs the measuring value according to the internalcircuit conditions (communication, input current). Use it for your reference.・When the temperature of the front is much different from the temperature of installed panel, whenit cools inside the panel, it is impossible to measure correctly. Use the temperature correctionfunction in order to adjust the temperature and use only to check temperature trend.
