KW9M Eco-POWER METER19Display cycle DISP CYCLE*It skips this item when [0] is set for auto-display.Set each display cycle during auto-display.Press - △>, ▽> to set.[Set range] 1 to 99 sec (initial:5)increasedecreaseShift every 1second: [1]*Any key operation during auto-display makes the display shift to instantaneous active power.Temperature correction TEMP CORREThe measured temperature can be corrected to display.Press
- △>, ▽> to set.[Set range] -100.0 to 100.0 (initial: 0.0)increasedecreaseReset all integral value RESET ALLIntegral power (active, reactive, apparent) can be reset at one time.Press
- △>, ▽> to select.[Set list] YES, NO (initial: NO)Reset all : [YES]Not reset : [NO]Reset integral value 1 RESET 1*It skips this item when [YES] is selected for reset all integral value.Reset the integral power of 1CH/1-phase (active, reactive, apparent) and integral export powerof 1CH/1-phase (active, reactive).Press
- △>, ▽> to select.[Set list] YES, NO (initial: NO)Reset : [YES]Not reset : [NO]
