Panasonic th-32ef1e Operating Instructions Manual

Contents

English26Note● Displays the signal name as set in [Input label]. (seepage 43)● Input will not be switched unless [Input lock] is set to[Off]. (see page 53)● Image retention (image lag) may occur on the LCDdisplay panel when a still picture is kept on the panelfor an extended period. To prevent such a problem,using the screensaver and wobbling is recommended.(see page 42, 44)RECALLIt is possible to check the setting status of input label,picture mode, etc.Press .Current setting status will be displayed.12345PC16:9Memory name: MEMORY 2Off timer 90 min1 Input label2 Aspect mode (see page 28)3 Profile name (see page 39)4 Off timer remaining time (see page 27)5 Clock / Mute (see page 27, 56)● The followings are displayed for about 30 seconds atthe end: [No signal] - when there is no video signal tothe selected input, [No external media] - when a USBmemory is not connected to the USB terminal at thetime of using the USB input.● To display the clock, set [Date and time] and then set[Clock display] to [On]. (see page 47, 56)Selecting the input signalSelect the signals input to the unit.Press or .MENU ENTERINPUT + -UnitSwitches input every time the buttons are pressed.PC16:9[HDMI1] → [HDMI2] → [DVI-D] → [PC] → [VIDEO] →[USB][HDMI1]:HDMI 1 terminal, HDMI input[HDMI2]:HDMI 2 terminal, HDMI input[DVI-D]:DVI-D IN terminal, DVI-D input[PC]:PC IN terminal, PC input[VIDEO]:VIDEO terminal, composite video input[USB]:USB terminal, USB input