53English[1st search input], [2nd search input]Set the input to search when [Custom] is selected.[HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO] /[USB] / (None)Note● With the USB input, the unit determines no signalis present when the USB memory is not connectedto the USB terminal.● This menu will be greyed out and cannot be setunder the following conditions.• [Input lock] is not set to [Off]. (see page 53)● If the input is changed by this function, the lastinput is selected when the power is turned on nexttime.If you wish to retain the original input when thepower is turned on, set [Initial input] to the originalinput. (see page 53)Onscreen displaySet to display / hide the following Onscreen display.● Power on display● Input signal switch display● No signal display● No external media display (at USB input)● MUTE display after displaying the menu screen● MUTE and off timer remaining time display after is pressed● Off timer remaining time display when 3 minutesremaining[On]:Displays the Onscreen display.[Off]:Hides the Onscreen display.Initial inputAdjusts the input signal when the unit is turned on.[Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO]/ [USB]NoteThis menu is available only when [Input lock] is [Off].(see page 53)Initial VOL levelAdjusts the sound volume level when the unit is turnedon.[Off]:It will be the sound volume level which had beenset before the power of the unit was turned off.[On]:Sets your preferred volume.● Outputs with the set volume when [Initial VOL level] in[On] state is selected on the menu.■ To adjust sound volume levelPress .Note● When [Maximum VOL level] is [On], the volumecannot be set to the level higher than the level set for[Maximum VOL level].Maximum VOL levelAdjusts the maximum volume.[Off]:The sound volume level can be set up to 100(maximum).[On]:The sound volume level will not exceed the setpoint.● Outputs with the set volume when [Maximum VOLlevel] in [On] state is selected on the menu.■ To adjust sound volume levelPress .Note● When the [Maximum VOL level] is switched from[Off] to [On], if the [Maximum VOL level] is set lowerthan the [Initial VOL level], the [Initial VOL level]automatically becomes the same as the [MaximumVOL level].Input lockLocks the input switch operation.[Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO]/ [USB]Note● Input switch can be used when this is set to [Off].