Panasonic th-32ef1e Operating Instructions Manual

Contents

English70USB media playerFunction descriptionThe USB media player displays still pictures andmotion pictures saved in a USB memory by insertingthe USB memory device into the display unit.Note● To use this function, set [USB media player] to[Enable] in [Setup] - [USB media player settings]. (seepage 49)● Using the content list delivery function of the MultiMonitoring & Control Software (see page 62), content(still/motion pictures) played back on a USB mediaplayer and the playback list can be delivered.For details, refer to the manual of Multi Monitoring &Control Software.● The multi display mode is not available with USBinput.Single Media PlayerFiles are played by a single unit.USBmemoryMulti Media PlayerConnecting more than one unit using LAN cables playsback files in the USB memory simultaneously.One of the multiple units becomes the parent, and theothers are children. The two-unit configuration exampleis shown below.For LAN connection, see “Network environment (MultiMedia Player only)” (see page 74).USBmemoryParent ChildUSBmemoryHub or broadband routerNote● For Multi Media Player, one USB memory deviceis required for one unit. For Multi Media Player, theparent requires both “scenario.dat” and “filelist.dat”,and the child requires filelist.dat only.● “Describe GroupID:G01” without changingcharacters other than numbers (2-digit descriptionrequired). Without description, the Multi Media Playerdoes not function.